Sequins Embroidery Machine
Sequins Embroidery Machine
- 20–60 Heads
- 1,200 rpm
- 6 / 9
Sequins deviceDouble sequinFlat embroidery
Price on requestRead more
What we supply
One machine, every kind of work
Sequins, cording, beads, towel, boring and laser cutting are devices, not separate machines. One high-speed body carries whichever your order needs, and they can be mixed on the same machine — that is the point of a custom configuration.
Every machine is built to order — any of these functions can be added
Sequins device
1000 rpmFor saree, three-piece and party wear — the sparkle work buyers ask for by name.
- Practical speed up to 1000 rpm on 2 / 3 / 4 mm sequin
- Up to 12 sequins on one needle position, no colour change
- Single, twin, four, six, eight, twelve and movable twin
Easy cording device
1200 rpmFor raised cord and rope outlines, on heavy fabric where flat stitch looks thin.
- Built to hold the recommended speed on real production runs
- Cord and rope of 1–5 mm diameter
- Twin-colour, triple-colour, and an automatic trimmer version
Beads device
850 rpmFor bead and pearl work that would otherwise be stitched by hand, piece by piece.
- Practical speed 850 rpm on 2 / 2.5 mm loose beads
- Glass beads 2 / 2.5 mm, pipe and pearl 3 / 4 mm
- Sensor on the bead feed warns the operator early, so a break is caught before it spoils the run
Easy towel device
For chain-stitch loop texture — towel work, knitwear and thick decorative fill.
- Valve lifts the pendulum; presser foot and needle bar form the stitch
- Installs on an existing head — no new machine needed
- Loop height set by the pendulum position, not by the operator's hand
Boring device
For cutwork and eyelet designs that need a hole, not just a stitch.
- Hollow-out embroidery — holes carved, then embroidered
- Hole-carving needle, hole-carving knife, or an independent device
- The independent device is faster and much quieter
Laser cutting
For applique and export dress work, where the edge must be sealed as it is cut.
- CO₂ laser optical fibre — embroidery and cutting in one pass
- Engraving, layer cutting, boring, patch and applique
- Fabric, leather, mesh, toy and textile
Machines
Built 20 to 60 heads, to your order
Flat Embroidery Machine
Flat & Sequin Embroidery Machine
- 20–60 Heads
- 1,200 rpm
- 6 / 9
Sequins deviceFlat embroidery
Price on requestRead more
Laser Cutting Machine
Laser Cutting Embroidery Machine
- 12–40 Heads
- 1,200 rpm
- 9 / 12
Sequins deviceLaser cuttingFlat embroidery
Price on requestRead more
Watch it run
The machine on a working floor
Ten seconds on our floor — heads, needles and thread at working speed.
Before you decide
Two numbers worth running first
Why Perfect Art
Why owners come back for the second machine
Specification
The high-speed platform behind every configuration
Every figure in this table is the factory's, not a sales sheet. Read the two that decide whether the rest survive: the body beam and the number of back supports.
They are what hold the speed steady for fifteen years. A thin beam will run at 1500 rpm on day one and shake itself out of tolerance by the second season — which is why we quote them before we quote a price.
Seven systems, one machine
- Mainshaft drive
- Trimmer / hook thread
- Body / table
- Frame / driver
- Colour changing
- Computer system
- Additional device
| Machine type | High-Speed computerized embroidery machine |
|---|---|
| Speed | High speed 1200 rpm · Super high speed 1500 rpm |
| Heads | 20 to 60 heads (larger sizes on request) |
| Colours | 6 colour thread; 9 colour work also possible |
| Warranty | 15 months + long-term engineering support |
From order to first stitch
About 55 days, start to finish
Tell us your fabric
We match the head count and devices to the work you actually run.
Day 0Down payment & LC
Ready-stock machines are cash; imported machines open on LC.
Day 1Shipping from China port
20ft to 50ft containers depending on machine length.
Day 5–45Installation & training
Our engineers set it up on your floor and train your operators.
Day 55Purchase options
Three ways to buy
1. Cash — ready stock
Cash for a ready stock machine. It is on our floor; take delivery this week.
Read more2. Down payment + LC
Down payment system for LC machines. Delivery takes 55 days.
Read more3. Instalment — 10 months
From your second purchase we accept the instalment system: a 10-month EMI.
Read moreFrom the floor
What owners tell us
The machine was running on our floor in three days and the service team still picks up the phone at night.
We took the sequins machine for saree work. Six colour thread was enough for us, and the 1200 rpm is real, not a brochure number.
Second machine from Perfect Art, this one on the 10-month EMI. They did not push us to a bigger head count than we needed.
Questions
Asked before every purchase
Who comes when the machine stops?
Our own engineers, not a third party. Call the service number and we schedule a visit; for a stoppage on a running order we try to be on your floor the same day.
You can also raise it on this site and track it by reference number.
What happens after the warranty ends?
The engineering support does not end with it. We keep spare parts for the machines we sell, so a hook, a trimmer blade or a colour-change motor comes from our own stock instead of a fresh import.
Parts are charged, labour on an old customer's machine usually is not.
Can I see a machine running before I buy?
Yes, and we would rather you did. Come to our floor in Turag and watch a machine run your own design file, or we arrange a visit to a customer already running the model you are considering.
Do you install outside Dhaka?
Anywhere in Bangladesh. Narayanganj, Gazipur, Narsingdi, Chattogram, Sylhet — the engineers travel, set the machine up on your floor and stay until your operators can run it without them.
What power and floor space does one machine need?
Three-phase power, and a stable line matters more than the load itself — voltage that swings is the fastest way to kill a control board. We check your line at the site visit and tell you if a stabiliser is needed.
For floor space, allow the machine length plus about four feet clear on each side so an operator can work both faces and the frame can travel.
Do you train our operators?
Yes, on your own machine and your own designs, not a demo file. Training covers threading, frame setting, design loading, the daily oiling round and what to do before calling us.
Request a price
We reply on WhatsApp within one working day.
We provide super high-speed computerised embroidery machines.
Our own engineers install the machine, train your operators and keep the spare parts coming.
Not sure which machine fits your fabric?
Send us a photo of your design. We will tell you the head count, needles and devices you need — free.
Guides
Read before you buy
Embroidery machine price in Bangladesh (2026): what actually drives the number
Head count, needles, devices and speed — the four things that move the price, explained without sales talk.
Sequins, boring or laser cutting — which machine does your work need?
A short guide by product: garment piece, cap, panel, shoe, saree and three-piece.
What happens after you buy: installation, training and lifetime support
The part of the deal that decides whether the machine earns for 15 years.